Superparamagnetic Composite Nanobeads Anchored with Molecular Glues for Ultrasensitive Label-free Proteomics

Mass spectrometry has emerged as a mainstream technique for label-free proteomics. However, proteomic coverage for trace samples is constrained by adsorption loss during repeated elution at sample pretreatment. Here, we demonstrated superparamagnetic composite nanoparticles functionalized with molecular glues (MGs) to enrich proteins in trace human biofluid. We showed high protein binding (>95 %) and recovery (≈90 %) rates by anchor-nanoparticles. We further proposed a Streamlined Workflow based on Anchor-nanoparticles for Proteomics (SWAP) method that enabled unbiased protein capture, protein digestion and pure peptides elution in one single tube. We demonstrated SWAP to quantify over 2500 protein groups with 100 HEK 293T cells. We adopted SWAP to profile proteomics with trace aqueous humor samples from cataract (n=15) and wet age-related macular degeneration (n=8) patients, and quantified ≈1400 proteins from 5 μL aqueous humor. SWAP simplifies sample preparation steps, minimizes adsorption loss and improves protein coverage for label-free proteomics with previous trace samples.     

A Fully Conjugated Covalent Organic Framework with Oxidative and Reductive Sites for Photocatalytic Carbon Dioxide Reduction with Water

Constructing a powerful photocatalytic system that can achieve the carbon dioxide (CO₂) reduction half-reaction and the water (H₂O) oxidation half-reaction simultaneously is a very challenging but meaningful task. Herein, a porous material with a crystalline topological network, named viCOF-bpy-Re, was rationally synthesized by incorporating rhenium complexes as reductive sites and triazine ring structures as oxidative sites via robust −C=C− bond linkages. The charge-separation ability of viCOF-bpy-Re is promoted by low polarized π-bridges between rhenium complexes and triazine ring units, and the efficient charge-separation enables the photogenerated electron–hole pairs, followed by an intramolecular charge-transfer process, to form photogenerated electrons involved in CO₂ reduction and photogenerated holes that participate in H₂O oxidation simultaneously. The viCOF-bpy-Re shows the highest catalytic photocatalytic carbon monoxide (CO) production rate (190.6 μmol g⁻¹ h⁻¹ with about 100 % selectivity) and oxygen (O₂) evolution (90.2 μmol g⁻¹ h⁻¹) among all the porous catalysts in CO₂ reduction with H₂O as sacrificial agents. Therefore, a powerful photocatalytic system was successfully achieved, and this catalytic system exhibited excellent stability in the catalysis process for 50 hours. The structure–function relationship was confirmed by femtosecond transient absorption spectroscopy and density functional theory calculations.     

A DNA Origami-based Bactericide for Efficient Healing of Infected Wounds

Bacteria infection is a significant obstacle in the clinical treatment of exposed wounds facing widespread pathogens. Herein, we report a DNA origami-based bactericide for efficient anti-infection therapy of infected wounds in vivo. In our design, abundant DNAzymes (G4/hemin) can be precisely organized on the DNA origami for controllable generation of reactive oxygen species (ROS) to break bacterial membranes. After the destruction of the membrane, broad-spectrum antibiotic levofloxacin (LEV, loaded in the DNA origami through interaction with DNA duplex) can be easily delivered into the bacteria for successful sterilization. With the incorporation of DNA aptamer targeting bacterial peptidoglycan, the DNA origami-based bactericide can achieve targeted and combined antibacterial therapy for efficiently promoting the healing of infected wounds. This tailored DNA origami-based nanoplatform provides a new strategy for the treatment of infectious diseases in vivo.     

Correlation between Interfacial Structures and Device Performance: The Double-Edged Sword Effect of Lead Iodide in Perovskite Solar Cells

The interfacial electronic structure of perovskite layers and transport layers is critical for the performance and stability of perovskite solar cells (PSCs). The device performance of PSCs can generally be improved by adding a slight excess of lead iodide (PbI₂) to the precursor solution. However, its underlying working mechanism is controversial. Here, we performed a comprehensive study of the electronic structures at the interface between CH₃NH₃PbI₃ and C₆₀ with and without the modification of PbI₂ using in situ photoemission spectroscopy measurements. The correlation between the interfacial structures and the device performance was explored based on performance and stability tests. We found that there is an interfacial dipole reversal, and the downward band bending is larger at the CH₃NH₃PbI₃/C₆₀ interface with the modification of PbI₂ as compared to that without PbI₂. Therefore, PSCs with PbI₂ modification exhibit faster charge carrier transport and slower carrier recombination. Nevertheless, the modification of PbI₂ undermines the device stability due to aggravated iodide migration. Our findings provide a fundamental understanding of the CH₃NH₃PbI₃/C₆₀ interfacial structure from the perspective of the atomic layer and insight into the double-edged sword effect of PbI₂ as an additive.     

Fluorous Tagged Peptides for Intracellular Delivery and Biomedical Imaging

Fluorous tagged peptides have shown promising features for biomedical applications such as drug delivery and multimodal imaging. The bioconjugation of fluoroalkyl ligands onto cargo peptides greatly enhances their proteolytic stability and membrane penetration via a proposed “fluorine effect”. The tagged peptides also efficiently deliver other biomolecules such as DNA and siRNA into cells via a co-assembly strategy. The fluoroalkyl chains on peptides with antifouling properties enable efficient gene delivery in the presence of serum proteins. Besides intracellular biomolecule delivery, the amphiphilic peptides can be used to stabilized perfluorocarbon-filled microbubbles for ultrasound imaging. The fluorine nucleus on fluoroalkyls provides intrinsic probes for background-free magnetic resonance imaging. Labeling of fluorous tags with radionuclide ¹⁸F also allows tracing the biodistribution of peptides via positron emission tomography imaging. This mini-review will discuss properties and mechanism of the fluorous tagged peptides in these applications.     

Asymmetric Total Synthesis of Hasubanan Alkaloids: Periglaucines A–C,N,O-Dimethyloxostephine and Oxostephabenine

We report herein the asymmetric total synthesis of periglaucines A–C, N,O-dimethyloxostephine and oxostephabenine. The key strategies used include: 1) a Rh^I-catalyzed regio- and diastereoselective Hayashi-Miyaura reaction to connect two necessary fragments; 2) an intramolecular photoenolization/Diels–Alder (PEDA) reaction to construct the highly functionalized tricyclic core skeleton bearing a quaternary center; 3) a bio-inspired intramolecular Michael addition and transannular acetalization to generate the aza[4.4.3]propellane and the tetrahydrofuran ring.     

One-pot synthesis of CoO–ZnO/rGO supported on Ni foam for high-performance hybrid supercapacitor with greatly enhanced cycling stability

The high specific capacitance along with good cycling stability are crucial for practical applications of supercapacitors,which always demands high-performance and stable electrode materials.In this work,we report a series of ternary composites of CoO-ZnO with different fractions of reduced graphene oxide(rGO) synthesized by in-situ growth on nickel foam,named as CZG-1,2 and 3,respectively.This sort of binder-free electrodes presents excellent electrochemical properties as well as large capacitance due to their low electrical resistance and high oxygen vacancies.Particularly,the sample of CZG-2(CoO-ZnO/rGO 20 mg) in a nanoreticular structure shows the best electrochemical performance with a maximum specific capacitance of 1951.8 F/g(216.9 mAh/g) at a current intensity of 1 A/g.The CZG-2-based hybrid supercapacitor delivers a high energy density up to 45.9 Wh/kg at a high power density of 800 W/kg,and kept the capacitance retention of 90.1% over 5000 charge-discharge cycles.     

High-yield synthesis of a novel water-soluble macrocycle for selective recognition of naphthalene

A novel good water-soluble macrocycle containing two pyridinium moieties was synthesized in high yield.It could form 1:1 complexes with neutral guests containing naphthalene or phenyl units in water.The water-soluble macrocycle can selectively encapsulate naphthalene to form a 1:1 complex over a variety of polycyclic aromatic hydrocarbons.     

多相催化过硫酸盐工艺处理水环境中有机污染物的非自由基过程

20世纪80年代至今,水处理技术中的高级氧化过程(AOP)已被广泛研究及应用。然而水体中的有机污染物仍因种类繁多和降解难易不同困扰着研究者们,因此对于AOP的机理过程需要更深入的分析认识,以利于技术的进一步发展及应用。AOP中的过硫酸盐氧化工艺近年来得到大量关注,其自由基机理的关键活性物种是·OH 和·SO₄^-。非自由基机理分为¹O₂氧化和PS直接氧化(也称电子转移),某些体系中高价态金属也直接或间接地参与氧化过程。但非自由基过程的发生机理及优势特点仍存在争议。本文综述了基于多相催化过硫酸盐高级氧化过程处理水中有机污染物的最新研究,阐述反应机理及其分析手段,并指出当前研究可能存在的问题。对于过硫酸盐高级氧化工艺中非自由基过程的未来研究方向及应用前景提出展望。